Command PRO CH440DF

Command PRO gaseous fuel engines are designed to run on either gasoline or propane. This professional line of carbureted propane and gasoline engines allow you to choice the best way to use your engine.

  • Designed to operate on gasoline and propane fuels with installation of regulator kit
  • Cast iron cylinder liners provide lasting durability
  • KOHLER® 3-year commercial warranty
  • Oil Sentry™ automatically shuts engine down in low-oil conditions
  • Made it for heavy duty work
Owner's manual
Download PDF
Engine Type

Four-cycle, dual-fuel conversion, OHV, cast iron cylinder liner, aluminum block

Model Command PRO CH440DF
Power[[1]] kw (hp) 10.5(14)
Displacement cm3 (in3) 429 (24.7)
Bore mm (in) 89 (3.5)
Stroke mm (in) 69 (2.7)
Gross Torque[[1]] Nm (lb-ft) 30.8 (22.7)
Compression Ratio 8.3:1
Dry Weight kg (lbs) 33 (72.8)
Oil Capacity L (US qt) 1.1 (1.16)
Lubrication Splash
Dimensions LxWxH mm (in) 411 x 452 x 443
(16.2 x 17.8 x 17.4)
Backpressure Limit[[2]] 40
Certified Power[[3]] kw (hp) 10 (13.4)
Certified rpm rpm 3600
Emissions Compliance
  • EU Stage V
  • China Phase II
  • Not Certified in CA
  • EPA Phase III
Engine Type Commercial

Length is PTO to recoil cover. Width is fuel tank to muffler. Height is from mounting surface to top of muffler.

1 Power (hp) and Torque (ft lbs) specifications for Kohler general purpose engines are rated pursuant to Society of Automotive Engineers (SAE) J1940 based on gross output testing performed according to SAE J1995 without the air cleaner and muffler. Actual engine power and torque are lower and affected by accessories (air cleaner, exhaust, charging, cooling, fuel pump, etc.), application, engine speed, ambient operating conditions (temperature, humidity and altitude) and other factors. This J1940 / J1995 rating provides consistent measurement to customers who may want to control the intake and exhaust features of the engine. For more information, contact Kohler Co. Engine Engineering Department. Kohler Co. reserves the right to change product specifications, designs and standard equipment without notice and without incurring obligation.

2 Inches of H20 @ 3600 RPM WOT

3 J1995 power and torque certified by 3rd Party Witness

Equipment Types

This engine powers the following equipment

  • Hydraulic Power Pack
  • Ground Pounder
  • Welder
  • Air Compressor
  • Tiller
  • Pump
  • Generator
  • Log Splitter
  • UTV
  • Go-Kart
  • Edger
  • Golf Cart
  • Aerator
  • Chipper
  • Cement Mixer
  • Concrete Trowel
  • Concrete Screed
  • Stump Grinder
  • Lawn Vacuum
  • Concrete Saw
  • Blower
  • Pressure Washer


Protect your investment.


Keep your engine running right.

Troubleshoot issues, stay on top of maintenance, buy KOHLER® replacement parts and get warranty information.



Buy Parts